Danfoss Icon2™ - designed to make life easier

Advanced room controls for hydronic floor heating and other applications with actuators. Designed to complement the interior. The Danfoss Icon2™ wireless thermostats brings new opportunities for thermostat placement. They can simply be placed wherever you want them. Just press the small magnet to the wall in the desired position and mount the thermostat on top.

Make it easier to save on the heating bill

According to the Danish Technological Institute, you save approx. 5% energy for each degree you turn down. Danfoss Icon2™ automatically regulates so that only the absolutely necessary energy is used to achieve the desired comfort. Therefore, with Danfoss Icon2™ you can lower the temperature a little without losing comfort and thus save energy.

Increased comfort in your home

Do you have rooms that do not get enough heat? Or is the heat distributed unevenly?
Danfoss Icon2™ has automatic balancing. This means that all rooms get exactly the heat they are set for. And pre-setting is not necessary.

Elegant room thermostats

The elegant room thermostats in the Danfoss Icon2™ series are inspired by simple design. The display turns off automatically when not in use, and the design is just as discreet as a light switch. Choose infrared sensor for bathrooms, so you are always guaranteed a nice warm floor

A quick look around the Danfoss Icon2™ system:

Danfoss Icon2™ delivers precise and efficient control of underfloor heating with smart-home compatibility and the flexibility of a solution that works with 90% of applications.

We have included everything you need

The Danfoss Icon2™ Main Controller is easily installed onto the wall, either by using the included screws or a DIN rail and the built-in spirit level guides to the perfect positioning.

There are no loose components – just unbox and installation can begin!

Fast and hassle-free

The innovative cabling saves you time, and the plug'n' push terminals make installation easy with minimal use of tools.

From here, the most important tool needed is a smartphone.

App-based installation

Set-up, commissioning and handover are all easier and faster because they are done digitally.

The Danfoss Icon2™ Commissioning App guides step-by-step and has everything needed to get the job done.

Mobile App Danfoss Ally™

All you need to control, schedule, and monitor your hydronic floor heating and radiator heating– from anywhere and at any time. Danfoss AllyTM App guides you through the quick setup and gives you the complete overview and control.​
​
Download the app for free from Google Play or App Store

Automatic balancing

Maintaining the right balance in every room

With Danfoss Icon2™ automatic balancing, the system will reduce the ”on” time for the shorter pipes found in small rooms and prioritize the longer pipes found in large rooms, in times where heat demand is high. This ensures all rooms will share the limited energy available in the way that delivers the greatest possible comfort and efficiency.

The benefits of automatic balancing

Energy savings
A balanced system can work with a lower supply temperature

Simple design
No calculations are needed as Danfoss Icon2™ takes care of it all

Easy installation
No need for pre-setting

Comfort
A more accurate room temperature in all areas of the house

Smart home compatibility

Danfoss Icon2™ integrates seamlessly with Danfoss Ally™ solutions and can be controlled from anywhere by the Danfoss Ally™ App, so end-users can enjoy all the benefits of a true smart-heating system. Set the temperature to 21°C degrees and that’s exactly what it will deliver.

The Danfoss Ally™ Gateway is the only extra device needed to get cloud connected and gain all the smart heating features on top.

Because Danfoss Icon2™ is built on Zigbee 3.0 protocol, customers can also control their heating with other 3rd party Zigbee based smart home solutions.

High scalability
Up to 45 room thermostats

Danfoss Icon2™ is designed to meet the demands of large installations, providing reliable and efficient control with high scalability.

With multiple main controllers functionality, the system supports up to four main controllers and as many as 45 thermostats, which can all be connected wirelessly for a streamlined setup. Once installed, all configuration and troubleshooting can be handled from the Icon2 Commissioning App, saving time by reducing the need for installers to move between rooms during both commissioning and ongoing maintenance.

With its high scalability and efficient centralized control, Icon2™ is ideally suited for large installations with extensive square footage and multiple manifolds.

Magnetic mounting

Installation has never been easier!

It’s not only the Danfoss Icon2™ controller that is quick and easy to install. The Danfoss Icon2™ solution gives you new opportunities for thermostat placement as well. The wireless thermostats can simply be placed wherever you want them. Just press the small magnet to the wall in the desired position and mount the thermostat on top.